There are 251 products.
Reference: 246010010
Brand: Piaggio
Imitation ignition coil for Runner 125-180cc
Reference: 826115
Brand: Piaggio
Original ignition coil for Runner 125-180cc
Reference: 431952
Brand: Piaggio
Guide at the bottom of the ignition.
Reference: SC-40419000
Brand: Piaggio
For Polini PWK 28mm to 34mm | Keihin 33mm to 38mm Ø 32-50mm steel
Reference: 574362
Brand: Piaggio
Connection nipple for the oil tank of a Gilera Runner or Piaggio Zip (also fits many other Piaggio, Vespa and Gilera scooters).
Reference: 58058R
Brand: Piaggio
Original horn switch for various Piaggio & Gilera scooters and motor scooters.
Reference: cm071803
Brand: Piaggio
The Original Horn for Gilera and Piaggio scooters is an essential component for optimal safety and visibility on the road. This horn is designed for a powerful and clear sound that attracts the attention of other road users.
Reference: 291017
Brand: Piaggio
The Blinker Relay Holder 291017 is an essential part for the correct functioning of the blinkers on your scooter. This holder ensures that the blinker relay is held firmly in place and provides an optimal electrical connection.
Reference: 482280
Brand: Piaggio
Heat shield for SM06 exhausts. Please note small production from SIP (CIF). OP=OP Order it together with an SM06 revision kit. See below.
Reference: 479665
Brand: Piaggio
Original o-ring head gasket for Piaggio & Gilera 180cc (Gilardoni Cylinder).
Reference: 271433 + 1B006376
Brand: Piaggio
Handlebar weight + bolt - Gilera Runner 50 - 180cc
Reference: 5830684
Brand: Piaggio
Handlebars for all Piaggio Zip 2000 models (including SP)
Reference: 100320200
Brand: Piaggio
Starter ring also called half pulley for Gilera & Piaggio 125 - 180cc 2 Stroke engines. NOTE 78 TEETH. Skipper but also Hexagon often has 76 teeth. Count them well first because if you order the wrong one your electric start will no longer work properly.
Reference: 479415 -828717
Brand: Piaggio
Guide pin rear pulley for your Gilera & Piaggio 125cc - 180cc scooter. Original quality, fast shipping. Order now!
Reference: 487638
Brand: Piaggio
The original Gileradoni 180cc cylinder only fits an M08 crankcase (Gilera Runner 180cc). You can turn off the cylinder shroud so that it also fits in an M07 or other small crankcase. Check out the tuned cylinders for that .
Reference: 82545R
Brand: Piaggio
Bearing in the gear cover (only single-geared).
Reference: 100200230
Brand: Piaggio
Bearing in the crankcase at the gearing (single-geared only).
Reference: 575321
Brand: Piaggio
Original Gilera vacuum valve, fits many Gilera and Piaggio models.
Reference: CM002205
Brand: Piaggio
Gasoline hose over the tank (see photo 2) is a hose that often hardens and starts leaking. I found a hose (original Piaggio) that fits this perfectly! Ø Diameter inside:10mm, outside: 16 mm l 1170 mm rubber transparent
Reference: BGM1207Z
Brand: Piaggio
Complete and high-quality gasket set for the Piaggio & Gilera Maxi 2-stroke cylinders. To achieve the perfect squish, three different foot gaskets are included in the set (0.4 mm, 0.5 mm, 0.8 mm). The foot gaskets are coated with Duroseal to ensure a perfect seal.
